NL241 Wireless Network Link Interface
12
Standby power is when the NL241 Wi-Fi power has been turned
off. This state can be enabled by configuration of the
Mode
button
or by using the
IPNetPower()
datalogger instruction. See the
CRBasic help for an example of using the
IPNetPower()
instruction. Note that the
IPNetPower()
instruction is only
applicable when the NL241 is configured with bridge mode
(p. 16)
, for information on
the
Mode
button configuration.
Operating Temperature
Standard: –40 to 70 °C
Configuration
DevConfig
over USB or Wi-Fi
Telnet console over Wi-Fi
Terminal menu over RS-232
CS I/O Port
SDC 7, 8, 10, 11 (does not support ME)
9600 to 460.8 kbps
RS-232 Port
DTE
1200 bps to 115.2 kbps
WLAN
Antenna Connector: RPSMA
Supported Technologies: 802.11b/g/n, WPA/WPA2-Personal,
WPA/WPA2-Enterprise Security, WEP
Client Mode: WPA/WPA2-Personal and Enterprise, WEP
Access Point Mode: WPA2-Personal
Communication Rate
•
802.11b: up to 11Mbps
•
802.11g: up to 54 Mbps
•
802.11n: up to 72 Mbps
Frequency: 2.4 GHz
Transmit Power: 7 to 18 dBm (5 to 63 mW)
Rx Sensitivity: –97 dBm
Supported Protocols
IPv4, IPv6, ICMP/Ping, ICMPv6/Ping, TCP/IP, DHCP Client, DHCP
Server (in Access Point Mode only), SLAAC, DNS Client, HTTPS Proxy,
TLS, Telnet Server, PakBus®, Modbus
Miscellaneous
Supports 50 simultaneous TCP connections
Up to 10 of the 50 TCP connections can be used for TLS
PakBus® router supports 50 routes
Supports up to 15 concurrent Modbus server transactions
Compliance
CE Compliant
Complies with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules.
NOTE
Содержание NL241
