Campbell LS300G, Инструкция по эксплуатации

Страница: 30 / 56

LS300G GSM/GPRS/EDGE/HSPA+ Sierra Wireless Cellular Modem
22
Power LED – monitors power and GPS status
•
Off – no power or power outside operating range
• Red – not operational
•
Yellow – entering low power mode or boot
•
Green – power within range and normal operation
• Green with yellow flash – GPS fix
Light Patterns
•
Normal – Each LED, mentioned above, lit as applicable
• Start up – The LEDs will cycle
•
Configuration Reset – LEDs flashing yellow
8.3 Reset Button
The Reset button has two functions. If it is quickly depressed and released, the
modem will simply power cycle the internal hardware. If, however, the reset is
depressed and held for several seconds (count to 60 slowly and wait for all of
the lights to flash yellow continuously), the ALEOS® configuration settings
will return to the factory defaults.
9. Troubleshooting
Note that it can take several minutes (at least three) for the L300G to boot and
authenticate on the network. If you are not able to communicate after five
minutes, use the flowcharts below to troubleshoot the issue.