Campbell GXL, Руководство пользователя

Страница: 13 / 44

13
Step 6
Engaging the clamp:
A. Press down on the lifting shackle until the cam retracts. Occasionally, a cam
may jam against a pad. To release, either tap the heel of the shackle, or grasp
clamp by the shackle and tap bottom of clamp sharply against floor or other
solid surface.
B. Install the clamp over the plate to the full depth of the throat opening.
C. Release the shackle so the cam engages the plate.
Step 7
Lift slowly and smoothly. The operator should stand clear of the load and never
lift over people or machinery.
Step 8
After the plate is in place and at rest, the GX clamp can be removed by retracting
the cam away from the plate. To do this, press down on the lifting shackle while
at the same time lifting the clamp from the plate. If the cam is difficult to retract, a
slight tap on the heel of the shackle or the clamp’s body should release it.
Step 9
Campbell
®
recommends inspection of each lifting clamp before and after
each lift.Refer to the Maintenance and Inspection section of this manual for
detailed instructions.
WARNING!: Do not begin to lift until all personnel are clear of the lift area.
Never stand under or near a member being lifted .
WARNING!: Do not jerk or bump load while lifting .
WARNING!: Do not use a clamp that needs repair.