Campbell GXL, Руководство пользователя

Страница: 36 / 44

36
Drum Handling Equipment
Single drum lifter, No. 52
The Campbell
®
drum lifter (Fig. 54) is a completely
drop-forged unit for lifting steel drums. It is designed
to accommodate a great variety of drums with or
without heads removed. It snaps onto the drum and
is held there by its spring-loaded cam, even if there
is no load. Drums can be lifted from horizontal or
vertical position and reversed.
The cam and pad are the vital working parts of
every clamp. They also are the parts subject to
wear and should be carefully inspected to assure
safe operation (Fig. 57).
The amount of wear occurs in direct relation to use.
Since this cam is for lifting drums only, wear will
occur in one area of the cam working surface.
Examine the cam surface and compare the worn
WARNING!: Inspect clamp before each lift. If
cam or pad teeth are worn, or spring is weak,
or if clamp is damaged, do not use it.
WARNING!: The clamp must be positioned with the
spring-loaded cam on the outside of the drum (Fig. 55).
WARNING!: This clamp is suitable for lifting steel
drums only. This tool is not designed for lifting
plastic drums or metal plates or sheets. (Fig. 56).
Figure 54
Figure 55
Figure 56
Figure 57
Yes
No
No Yes