35
Figure 49
Duplex Hand Grip
This clamp is designed to carry or pull any metal, plastic
or structural shapes that will fit into its jaws. It grips and
releases automatically and is small and lightweight. The
Duplex Hand Grip is also furnished with an eye nut rather
than a handle for conveyor applications (Fig. 49).
No
Yes
Figure 50
No
Yes
Figure 51
No
Yes
Figure 52
Figure 53
No
No
WARNING!: Position clamp to balance load. A trial tensioning of load will
usually indicate proper balance (Fig. 52).
WARNING!: Do not exceed Working Load Limit
of 500 lb (225 kg)
.
WARNING!: Inspect clamp. If cam teeth are worn,
or if clamp is damaged, do not use clamp (Fig. 50).
WARNING!: Do not lift more than one plate (Fig. 51)
.
WARNING!: Attach clamp so that it is square with plate and plate is inserted to
full depth of opening.
WARNING!: Take up slack slowly. Do not
bounce or jerk load (Fig. 53).
WARNING!: All personnel must stand clear of loads
while they are being lifted or moved, except for
operators of manually lifted hand grips (Fig. 51)
.
Содержание GXL
Страница 1: ......
