manualshive.com logo in svg

Campbell CR23X, Руководство оператора

Операторская инструкция Campbell CR23X доступна для загрузки бесплатно на нашем сайте. Этот ручной прибор обеспечивает надежное управление и многофункциональность. Загрузите свою инструкцию сейчас, чтобы получить полную информацию о функциях и настройках CR23X. manualshive.com - ваш источник всех руководств.

Поделиться
Скачать
background image

CR23X MICROLOGGER OVERVIEW 

OV-5 

Return currents from the CAO and pulse-
counter channels should be tied to the   
terminals in the CAO and pulse-counter 
terminal strip to prevent them from flowing 
through the analog measurement section. 

The ground lug is also marked   and provides 
a rugged ground path from the individual   and 
G terminals to earth or chassis ground for ESD 
protection. 

Review Section 14.7 for complete grounding 
recommendations. 

OV1.1.8  5V OUTPUTS 

The 5 V (

±

4.0%) output is commonly used to 

power peripherals such as the QD1 Incremental 
Encoder Interface, AVW1 or AVW4 Vibrating 
Wire Interface. 

The 5 V output is common with pin 1 on the CS 
I/O 9 pin connector;  200 mA is the maximum 
combined output. 

OV1.1.9  CS I/O 

The 9 pin CS I/O port contains lines for serial 
communication between the CR23X and 
external devices such as computers, printers, 
Campbell modems, Storage Modules, etc.  

This 

port does NOT have the same configuration 
as the 9 pin serial ports currently used on 
most personal computers

.  It has a 5 VDC 

power line which is used to power peripherals 
such as Storage Modules. The same 5 VDC 
supply is used for the 5 V output on the lower 
right terminal strip.  It has a 12 VDC power line 
used to power other peripherals such as the 
COM200 phone modem.  Section 6 contains 
technical details on serial communication. 

OV1.1.10  COMPUTER RS-232 PORT 

This port is an optically isolated standard 9 pin 
RS-232 DCE/DTE port.  It can be connected 
directly to the serial port of most personal 
computers.  A 6 foot 9 to 9 pin serial cable and a 
9 to 25 pin adapter are included with the CR23X 
to connect this port to a PC serial port. 

OV1.1.11  SWITCHED 12 VOLT 

The switched 12 volt output can be used to 
power sensors or devices requiring an 
unregulated 12 volts.  The output is limited to 
600 mA at 50°C (360 mA at 80°C) current.  The 

switched 12 volt port is addressed as “Port 9” in 
a datalogger program. 

When the port is set high, the 12 volts is turned 
on; when the port is low, the switched 12 volts is 
off (Section 8.12). 

OV1.2  CONNECTING POWER TO THE CR23X 

The CR23X should be powered by any clean, 
battery backed 12 VDC source.  The green 
power connector on the wiring panel is a plug in 
connector that allows the power supply to be 
easily disconnected.  The power connection is 
reverse polarity protected.  The datalogger 
should be earth or chassis ground during 
routine operation.  See Section 14 for details on 
power supply connections and grounding. 

When primary power falls below 11.0 VDC, the 
CR23X stops executing its programs.  The Low 
Voltage Counter (

∗

B window 9) is incremented 

by one each time the primary power falls below 
11.0 VDC and E10 is displayed.  A double dash 
(--) in the 9th window of the 

∗

B mode indicates 

that the CR23X is currently in a low primary 
power mode. (Section 1.6) 

The datalogger program and stored data 
remain in memory, and the clock continues to 
keep time when power is disconnected.  The 
clock and SRAM are powered by an internal 
lithium battery.  (Section 14.11.2) 

OV2.  MEMORY AND PROGRAMMING 

CONCEPTS 

OV2.1  INTERNAL MEMORY 

The standard CR23X has 512 Kilobytes of 
Flash Electrically Erasable Programmable 
Read Only Memory (EEPROM), 128 Kilobytes 
Static Random Access Memory (SRAM), and 1 
Megabyte of Flash RAM.  As an option, the 
CR23X can be purchased with 4 Megabyte 
Flash for final storage.  Operating system 
EEPROM stores the operating system, user 
programs, and labels.  SRAM is used for final 
storage data and running the user program.  
Final Storage Flash is used for data storage.  
The use of the Input, Intermediate, and Final 
Storage in the measurement and data 
processing sequence is shown in Figure 
OV2.1-2.  The five areas of SRAM are: 

Содержание CR23X























































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для CR23X

Paradyne 3163 Quick Reference preview
3163
Бренд: Paradyne Страницы: 16
Commell ES-270 User Manual preview
ES-270
Бренд: Commell Страницы: 36
Dentsply Sirona inLab Speedcure 9494800 Instruction Manual preview
inLab Speedcure 9494800
Бренд: Dentsply Sirona Страницы: 91
Dantel 46020-38 Installation & Operation Manual preview
46020-38
Бренд: Dantel Страницы: 62
NXP Semiconductors UM10301 PCA8565 User Manual preview
UM10301 PCA8565
Бренд: NXP Semiconductors Страницы: 54
Cypress Semiconductor CY7C68033 Specification Sheet preview
CY7C68033
Бренд: Cypress Semiconductor Страницы: 33
Rainbow QPBB Instruction Manual preview
QPBB
Бренд: Rainbow Страницы: 2
Intercoax IXWB-450 Quick Start Manual preview
IXWB-450
Бренд: Intercoax Страницы: 2
Powerleap PL-PROMMX Manual preview
PL-PROMMX
Бренд: Powerleap Страницы: 28
netsys NVF-2400S User Manual preview
NVF-2400S
Бренд: netsys Страницы: 164
Spirent A2-400 Installation Instructions Manual preview
A2-400
Бренд: Spirent Страницы: 22
Magewell XI100DUSB-SDI User Manual preview
XI100DUSB-SDI
Бренд: Magewell Страницы: 10
Z3 Technology Z3-HE2160-RPS User Instructions preview
Z3-HE2160-RPS
Бренд: Z3 Technology Страницы: 18
Keithley 7075 Instruction Manual preview
7075
Бренд: Keithley Страницы: 108
Kontron MSP8040 Series User Manual preview
MSP8040 Series
Бренд: Kontron Страницы: 32
ADTRAN 1200864L1 Quick Start Manual preview
1200864L1
Бренд: ADTRAN Страницы: 2
Aim ACE1553-3U-4 Hardware Manual preview
ACE1553-3U-4
Бренд: Aim Страницы: 35
Ultra Products Internal All-in-One Digital Media Drive ULT31793 Specifications preview
Internal All-in-One Digital Media Drive ULT31793
Бренд: Ultra Products Страницы: 1

Бренды по названию

Популярные бренды

Загрузить еще бренды