background image

i

NL100/105 Table of Contents

1.  Introduction.................................................................1

1.1  Physical Description of the NL100/105....................................................1
1.2  Specifications............................................................................................2

2.  Setting up the NL100/105 for Communication..........3

2.1  Computer to NL100/105 Physical Connection .........................................3
2.2  Communication with the NL100/105........................................................4

2.2.1  Establishing the Initial Communication ..........................................4
2.2.2  Establishing Communication Outside of ConfMon Mode ..............4

2.3  NL100/105 Menu Options ........................................................................5

2.3.1  Ver ..................................................................................................5
2.3.2  Show ...............................................................................................6
2.3.3  Edit..................................................................................................6
2.3.4  Defaults .........................................................................................12
2.3.5  Reset..............................................................................................13
2.3.6  Help...............................................................................................13
2.3.7  Bye ................................................................................................13

3.  Connecting the NL100/105 to a Network .................13

3.1  Network to NL100 Connection...............................................................13
3.2  NL100/105 to Datalogger Connections - Array Based Dataloggers .......14

3.2.1  Direct Connect from the NL100/105 to a Datalogger ...................15
3.2.2  MD9 Connection from NL100/105 to Datalogger ........................16
3.2.3  RF Connection from NL100/105 to Datalogger............................17
3.2.4  Short Haul Modem Connection from NL100/105 to Datalogger ..18
3.2.5  Phone Modem Connection from NL100/105 to Datalogger .........19

3.3  NL100/105 to Datalogger Connections - CR9000/CR5000....................20

3.3.1  Software Setup ..............................................................................20
3.3.2  Hardware Setup for NL105 Communication with the

CR9000 via TLink...................................................................20

A.  CS I/O Port .............................................................. A-1

B.  Null-Modem Cable .................................................. B-1

C.  10 Base-T Cabling .................................................. C-1

Glossary

Содержание CNL100



































Отзывы: