Campbell CNL100, Инструкция по эксплуатации

Страница: 18 / 34

NL100/105 Network Link Interface
12
alphanumeric characters and is case-sensitive. This security measure is
implemented to help prevent unauthorized users from gaining access to the
NL100/105 device.
2.3.3.12 Serial Server Watchdog
If no communication is detected for a specified number of minutes, the
NL100/105 will drop the communications link. This feature is called a
"watchdog". The watchdog alleviates the problem of a communications port
being held open, thus rendering the device inaccessible, if the NL100/105 and
the remote device failed to terminate the communications link in a "normal"
manner. The number of minutes that the NL100/105 should wait for activity on
a port before timing out is entered for this menu item. This setting affects all
communication modes, including when the NL100/105 is configured as a
PakBus based or TCP/IP based serial server, and when communicating with the
NL100/105 during a Telnet session.
2.3.4 Defaults
The Defaults option displays the factory default settings for the different
telecommunication options. Following the display is a prompt to Save or
Cancel. If Save is selected, the NL100/105 will be reset to the factory defaults.
If Cancel is chosen, the current settings will remain in effect and the user will
be returned to the main menu prompt. The default settings are as follows:
TLink config: [disabled]
RS485 config: [PakBus]
RS485 bps: [38k]
RS485 beacon interval (sec): [60]
CS I/O config: [PakBus]
CS I/O SdcAddr/bps: [SDC7]
CS I/O beacon interval (sec): [60]
RS-232 config: [ConfMon]
EtherNet 10BASE-T: [enabled]
10BASE-T port IP address: [0.0.0.0]
10BASE-T port network mask: [255.255.0.0]
Is there a default gateway: [no]
PakBus node Id: [678]
Clock neighbor node Id: [0]
PakTcp server config: [enabled]
PakTcp server port number: [6785]
PakTcp client config: [disabled]
MODBUS/TCP gateway config: [disabled]
Configuration monitor telnet port: [23]