l
The most convenient means for mounting the unit to a frame or wire is to use large, high-
strength nylon cable ties (7.6 mm (0.3 in) width) or stainless steel hose clamps. First cover
the area(s) to be clamped with electrical tape or 2 mm (1/16 in) neoprene sheet. Clamp the
unit to the mounting frame or wire in the padded area.
CAUTION:
Lightly tighten the hose clamps. Overtightening may crack the pressure housing and
cause a leak. Use spacer blocks when necessary to prevent chafing the unit with the
frame or the wire.
l
Mounting inside the end of a PVC pipe is a convenient way to provide structure and
protection for deployments. The ClariVUE 10 fits inside a 2-in schedule 40 PVC pipe.
ClariVUE™10 Side-Scatter Turbidity Sensor
10