![background image](http://html1.mh-extra.com/html/campbell/clarivue-10/clarivue-10_product-manual_3781804011.webp)
the files that
Short Cut
creates are a great source for programming code to start a new program
or add to an existing custom program.
NOTE:
Short Cut
cannot edit programs after they are imported and edited in
CRBasic Editor
.
A
Short Cut
tutorial is available in
(p. 2). If you wish to import
Short Cut
code into
CRBasic Editor
to create or add to a customized program, follow the procedure in
Short Cut code into CRBasic Editor
(p. 25). Programming basics for CRBasic data loggers are
provided in the following section. A downloadable example program is available at
www.campbellsci.com/downloads/clarivue-example-program
.
7.2.1 CRBasic programming
The
SDI12Recorder()
instruction is used to measure a ClariVUE 10. The
SDI12Recorder()
instruction sends a request to the sensor to make a measurement and then retrieves the
measurement from the sensor. See
(p. 12) for more information.
For most data loggers, the
SDI12Recorder()
instruction has the following syntax:
SDI12Recorder
(Destination, SDIPort, SDIAddress, “SDICommand”, Multiplier, Offset,
FillNAN, WaitonTimeout)
Valid values for the
SDIAddress
are 0 through 9, A through Z, and a through z; alphabetical
characters need to be enclosed in quotes (for example,
“A”
). Also enclose the
SDICommand
in
quotes as shown. The
Destination
parameter must be an array. The required number of
values in the array depends on the command (see
(p. 12)).
FillNAN
and
WaitonTimeout
are optional parameters (refer to CRBasic Help for more
information).
7.3 Mounting
Schemes for mounting the ClariVUE 10 will vary with applications; however, the same basic
precautions should be followed to ensure the unit is able to make a good measurement and that
it is not lost or damaged.
l
Orient the unit so that the ClariVUE 10 looks into clear water without reflective surfaces. This
includes any object such as a mounting structure, a stream bed, or sidewalls. The
sidescatter sensor can see to about 5 cm (2 in) at 90°.
ClariVUE™10 Side-Scatter Turbidity Sensor
8