Campbell CCFC, Инструкция по эксплуатации

Страница: 94 / 106

CCFC Field Camera
84
x
Total power consumption is the sum of the Active and Quiescent
Power
Total power = Quiescent Power + Active Power
Total power = 0.1418 Amp-Hours/Day + 0.0917 Amp-Hours/Day
Total power = 0.2335 Amp-Hours/Day
17. CCFC Compatability
As shown in Table 17-1 CCFC Compatibility with Contemporary and Retired
Dataloggers , The CCFC is compatible with several contemporary and retired
Campbell Scientific dataloggers.
Table 17-1 CCFC Compatibility with Contemporary and Retired
Dataloggers
Contemporary Dataloggers Retired Dataloggers
CR200/200X CR510
*
CR300 CR10X
*
CR800/CR850 CR23X
*
CR1000
CR3000
CR6
*
Must be the -2M versions and must use the PakBus operating system.
18. CR1000 Interface Guide
The CCFC can interface to the CR1000 using the RS-232 (default) or RS-485.
The RS-232 configuration is the simplest option as it does not require an
additional hardware interface (see Section 13
RS-232 Communications ). The
pigtail end of the CCFC Power & I/O cable can be terminated directly to the
CR1000 wiring panel control ports (COM1-4). Refer to Section 8
Cables/Wiring for wiring details.
The CCFC RS-485 interface can also be used, but does require the use of an
MD485 interface to provide conversion of the RS-485 signal (see Section 14
RS-485 Communications ). The MD485 can connect to the CR1000 using the
CS I/O port or the RS-232 port. Refer to the MD485 manual for additional
information.
18.1 CR1000 Memory Setup
To facilitate the storage of photos, a CFM100 allows the use of a compact flash
card on the CR1000. Memory can also be allocated from the CR1000 internal
memory to create a virtual user drive – USR. Entering a non-zero value for the
parameter
USR:drive size allocates internal memory for the drive. The amount
of memory required varies depending on each application. A good number to