Campbell CCFC, Инструкция по эксплуатации

Страница: 62 / 106

CCFC Field Camera
52
Table 12-16 Wired Ethernet Settings
Variable Allowable Values Description
Configure
Automatically
Checkbox Enables DHCP operation of the network interface.
Operates as a Static IP address if Disabled
(unchecked).
IP Address
1.2.3.4 Only set if DHCP is Disabled. Gain IP address from a
network administrator.
Netmask
255.255.255.0 Only set if DHCP is Disabled. Gain Netmask from a
network administrator.
Default Gateway
192.168.1.1 Only set if DHCP is Disabled. Gain Default Gateway
from a network administrator.
Primary Name
Server 192.168.1.1 Only set if DHCP is Disabled. Gain Primary Name
Server from a network administrator.
HTTP Port
80 or values between
1025 and 65535 Alternate ports can be used for the http interface. Gain
HTTP Port from a network administrator.
12.8.2.2 Wi-Fi Settings
The onboard Wi-Fi connection allows the camera to transmit files without the
need for a wired Ethernet connection. It acts as a way to connect to the camera
to configure the settings. The camera does not relay network traffic between
the Wi-Fi and wired Ethernet connections, meaning a computer connected to
the camera’s Wi-Fi access point will not be able to access the wired network.
The Wi-Fi on the camera can connect to an existing network or become a Wi-
Fi access point. By default, the camera Wi-Fi will be set up as an access point
with a name such as
CCFC-1000, where 1000 is the serial number of the
camera. This allows the user to quickly find and connect to the camera on the
first power up.
The CCFC does not currently support Wi-Fi protected setup
(WPS) as a configuration mechanism.
Figure 12-29 Wi-Fi Settings
As shown in Table 12-17 Wi-Fi Settings , there are two items on the Network
page under the camera’s Wi-Fi Settings to be aware of.
Note