Campbell CCFC, Инструкция по эксплуатации

Страница: 42 / 106

CCFC Field Camera
32
The voltage levels are:
x
Low Level: <0.65 V (-20 Vdc Absolute Min)
x
High Level: >2.0 Vdc (+20 Vdc Absolute Max)
Leaving the External Trigger signal in the active state prevents the camera
from entering into a low powered state. If an external device is allowed to keep
the camera in its
Fully On State , power consumption will be greatly affected.
When the camera is fully on and no other process is occuring, the time from the
transition of the signal from inactive to active, to the time a picture is captured
or video is started, is typically less than 100 msec. The parameter descriptions
for the
External Trigger setup are outlined in Tables 12-6 and 12-7 External
Trigger Variables for Photos and External Trigger Variables for Videos,
respectively.
Figure 12-11 External Trigger: Create New Profile
Table 12-6 External Trigger Variables for Photos
Variable Allowable Values Description
Enable + Opens External Trigger:Create New Profile to add parameters.
Title
Text Name the setting in order to navigate to it at a later date. Also acts
as a directory name in the
File Explorer see section 12.7 File
Explorer.
External Trigger
Active High Configures External Trigger to capture on a positive voltage.
Active Low Configures the External Trigger to capture with 0 volts.
Lens Position
Checkbox Select 1- 4 lens positions for the capture. See Section 12.5 Lens
Position. Selecting the green position title opens the Lens Position
modal.