Campbell CCFC, Инструкция по эксплуатации

Страница: 28 / 106

CCFC Field Camera
18
address in the address bar of the browser. After typing the address, the
homepage (
Dashboard) of the CCFC camera should appear, as shown in
Figure 12-1 Dashboard Desktop view .
The camera ships with automatic network configuration via DHCP enabled. It
is highly recommended to keep track of any changes made to the network
settings.
11.1 Setup Using Wi-Fi
The CCFC is Wi-Fi enabled. While the camera is powering up, start the
computer/mobile device and connect to the camera via its Wi-Fi network. The
camera will appear as
CCFC-1000 (for example), where 1000 is the last four
digits of the camera’s serial number, on the Wi-Fi network.
Once connected to the camera Wi-Fi, open a web browser and enter the default
Wi-Fi IP address into the address bar:
http://10.0.0.1 . This directs the user to
the camera’s web interface where the camera can be configured.
11.2 Setup Using Ethernet
11.2.1 Link Local IP Address Auto-Configuration
The CCFC supports an automatic IP address configuration in situations where
the camera is directly connected, via Ethernet cable, to a computer without the
need of a DHCP server.
This feature is automatically enabled in the camera and is transparent to its
normal operation. In this situation, the camera will be accessible using the IP
address 169.254.99.99. This address will be valid for accessing the camera in
any network configuration.
In order to use Link Local, the computer connecting to the CCFC
must be configured to use DHCP. If the computer is configured to
use a static IP, one of the remaining interface arrangements will
need to be used.
12. Camera Operation using the Web Interface
Review how to connect to the web interface with Section 11 Connecting to the
Web Interface.
Note