![Campbell CCFC Скачать руководство пользователя страница 72](http://html1.mh-extra.com/html/campbell/ccfc/ccfc_instruction-manual_3745995072.webp)
CCFC Field Camera
62
Full Power
Save
Camera is always on.
Average power consumption is reduced by 50mA @ 12 Vdc.
The Ethernet is normally turned off and is only enabled when outgoing
communications are required (email or FTP).
User needs to push the
Setup
Button
to temporarily enable the Ethernet port for
web page access.
Partially On
Always On
The camera is effectively off in a low powered state.
Typical power consumption is 90 mA @ 12 Vdc.
Ethernet is on and always available for incoming communications.
The camera will temporarily wake up to the fully on power mode when traffic
occurs on the network.
Warning:
In situations where there is constant network traffic, the camera may
effectively be in the
Fully
On
power mode.
Moderate
Power Save
Mode
The camera is effectively off in a low powered state
Typical power consumption is 60 mA @ 12 Vdc
Ethernet is always off
Disconnecting and connecting the camera to another Ethernet device will
momentarily wake up the camera to allow it to process incoming communications.
The camera will go into the low powered mode again – if no communications
occur.
Full Power
Save Mode
The camera is effectively off in a low powered state.
Average power consumption is typically 10 mA @ 12 Vdc.
The Ethernet is normally turned off and is only enabled when outgoing
communications are required (email or FTP).
User needs to push the
Setup
Button
to temporarily enable the Ethernet port for
web page access.
The camera can respond to RS-232 or RS-485 communication in this mode.
Deep Sleep
Always On
The Deep Sleep power consumption (6mA typically) is not affected by the
Ethernet Power Mode.
Ethernet, RS-232 or RS-485 communications are non-responsive in
Deep
Sleep
mode.
Moderate
Power Save
Mode
Not recommended.
Full Power
Save Mode
The Deep Sleep power consumption (6 mA typically) is not affected by the
Ethernet Power Mode.
If Ethernet communications are not used this can reduce the power consumption
of the camera by 50mA when the camera exits the
Deep
Sleep
state.
Off State
Always On
The Off State power consumption (1 mA typically) is not affected by the Ethernet
Power Mode.
Ethernet, RS-232 and RS-485 communications are non-responsive in the
Off
State.
Содержание CCFC
