Campbell CCFC, Инструкция по эксплуатации

Страница: 70 / 106

CCFC Field Camera
60
Communications using the PakBus protocol enables remote retrieval and/or
storage of photos or video to external devices such as compatible Campbell
Scientific dataloggers. Meaning, photos can be stored on the datalogger, which
allows for remote retrieval using the datalogger’s communication device. Both
RS-232 and RS-485 are available. The preferred setting is determined at the
time of ordering. Contact Campbell Scientific for more information.
Additionally, the PakBus neighbouring address allows for communication with
devices that are several hops away on the PakBus network. Further information
on PakBus is available in Section 15
Send via PakBus: PakBus
Communications.
Table 12-22 PakBus Settings
Variable Allowable
Values
Description
PakBus Port
Not editable. Displays as RS-232 or RS-485, depending on the option selected at
the time of purchase. (see Section 13
RS-232 Communications and
Section 14 RS-485 Communications ). This value will appear when
setting up a Capture Mode (see Section 12.4 Capture Modes ).
PakBus Address
1 to 4095 Enter PakBus Address from 1 to 4095. The factory default is 55.
This should be a unique address in the PakBus network.
PakBus Destination
1 to 4095 The PakBus address of the device the camera will communicate with
or send files to.
PakBus Neighbour
0 to 4095 Physically enter the address of the PakBus device to connect to the
CCFC PakBus communication lines. This allows the neighbor to relay
communication between the CCFC and the final destination for the
data. 0 is autodetect.
Communication
Delay 1 to 16 Extra delays may be required for certain communication links such as
satellite.
Security Code
0 to 65535 The factory default is 0. If a security code is not required by the
PakBus destination device, set this parameter to 0. Otherwise set the
security code as required by the destination service.