37
TROUBLESHOOTING - ERROR CODES
SENSOR
– – –
This is an error code that occurs with the meat probe. Check to
see if you have your meat probe inserted into the port on the
faceplate. If you have your meat probe inserted, try unplugging
the probe and then plugging it back in. If the error code
persists, then you may need a new meat probe.
FLAME OUT
This happens when the fire in the smoker goes out or falls
below a certain temperature and does not go back up. This
happens more so in the winter months. Also, make sure the
pellets are dry and do not have any moisture in them. If they
crumble easy, then they have moisture in them.
RTD ERROR
This is an error code that occurs with the RTD. Check that the
RTD connection is tight. Try unplugging and plugging it back in.
If the error code persists, you may need a new RTD
OVER TEMP
For your safety, if the smoker goes over 600F, the controller
will automatically shut down the pellet portion of the smoker to
avoid large grease fires.
