PM 1001937 000 00
Operating manual SIRAX BT7300 / BT7350
21/28
Set the DIP switches according to the template. Detailed information
on the individual positions of the DIP switches can be found in the
table "DIP switch settings" on page 22.
Press "Next".
To communicate with the SIRAX BT7300 or BT7350, check the available
COM PORT by clicking on the "UPDATE" button. Your PC will assign a
virtual COM for communication with the SIRAX BT7300 or BT7350.
Click the "CONNECT TO THE DEVICE" button, you will see a window
asking if you are connected to the device. Then click on this button in
this window "CONTINUE". After you have established the connection,
you can proceed with the configuration of the device on the setting
pages described below.
Now select the type of configuration creation.
Now configure the desired parameters of your device.
Press "Next".
