PM 1001937 000 00
Operating manual SIRAX BT7300 / BT7350
18/28
If you want to use the device in a horizontal
position, mount the hook as shown in the pic-
ture by pressing the center of the clip.
If you want to use the device in the vertical
position, then assemble the hook as shown
in the picture by sliding them into the slots
provided.
For horizontal DIN rail mounting, first hook in
the bottom and then press with both hands as
shown in the picture.
For vertical DIN rail mounting, first hook in the
underside and then press with both hands as
shown in the picture.
In order to be able to detach the devices from the DIN rail, use a screwdriver and pry up the
fastening elements as shown in the pictures. The slats detach from the DIN rail.
5. Electrical connections
Attention: danger to life!
Ensure under all circumstances that the leads are free of potential when connecting them!
It is to be noted, that the data given on the type plate are respected!
The national regulations for the installation and selection of the material of the electrical cables must be followed!
V
Vg
RS485
USB
LOAD
± 1000 / 100 VDC
± 800 / 80 VAC
Connection scheme BT7300 / BT7350