PM 1001937 000 00
Operating manual SIRAX BT7300 / BT7350
20/28
7. Programming
The SIRAX BT7300 or BT7350 can be programmed in two ways. On the one hand via the serial RS485-USB interface and the programming
software and on the other hand over the direct use of the Modbus address registers.
If you want to set up the units via the programming software, set the DIP switches to 0. If you want to set directly via the RS485 Modbus interfa-
ce, set the first DIP switch to 1 (up) and then the second one for the baud rate setting 0 for 9600 or 1 for 38400. After making the settings, save
the configuration via the command register, then turn off the power before setting the DIP switches to 0 to turn on the power.
Any changes made by dip-switch required to switch
off the power supply. It’s a safety condition in order
to prevent any manumission on the device.
Description
1
2
All setting from EEPROM
0
0
Set adress 1 - Baudrate 9600
1
0
Set adress 1 - Baudrate 38400
1
1
7.1 Programming over Software
Download the programming software for free from our homepage www.camillebauer.com.
Before you can use the software, check if you have Java (32-bit) installed on your computer. If not, download the Java software from the home-
page www.java.com.
To change the menu language of the software, go to the downloaded directory of the software. Open the file "004.ini" with a text editor program.
Now change the listed language, e.g. "EN" in the desired language e.g. "DE". Please note that only the languages listed in the directory can be
changed.
7.1.1 Configuration
Start the software with the file SIRAXBT7200-BT7300_007_v131.jar
Now click on "NEXT" to get into the menu window Connection.
In this mode, you can choose to program the device via a direct
connection via RS485-USB, or in offline mode.
Select the mode "Connection with RS485 connection", then you get to
the menu "DIP switch setting"
If you select the mode "no connection (OFF-Line)", then you arrive
DIRECTLY to the menu "configuration".
