manualshive.com logo in svg

Camille Bauer SIRAX BM1450, Руководство по эксплуатации

Поделиться
Скачать
Camille Bauer SIRAX BM1450 Скачать руководство пользователя страница 6

PM 1001812 000 00 

Device handbook SIRAX BM1450 

6/36

4.1 Mechanical installation
4.1.1 Panel cut out

4.1.2 Mounting of the device 

The device is suitable for panel widths up to 5mm

Variant with Mounting clamps

a) Slide the device into the cutout from the outside
b) Mounting is by four side clamps, slide the side clamps through side slot till side 

clamp gets firmly locked in a groove (Refer fig.) Consideration should be given 
to the space required behind the instrument to allow for bends in the connection 
cables.

4.1.3 Demounting of the device

The demounting of the device may be performed only if all connected wires are out of service. Remove all plug-in terminals and all connections 
of the current and voltage inputs. Pay attention to the fact, that current transformers must be shortened before removing the current connections 
to the device. Then demount the device in the opposite order of mounting.

4.2 Electrical connections

Ensure under all circumstances that the leads are free of potential when connecting them!

Содержание SIRAX BM1450




































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды