PM 1001812 000 00
Device handbook SIRAX BM1450
2/36
Legal information
Warning notices
In this document warning notices are used, which you have to observe to ensure personal safety and to prevent damage to property. The expla-
nation of the individual symbols can be found in chapter 2.
Qualified personnel
The product described in this document may be handled by personnel only, which is qualified for the respective task. Qualified personnel have
the training and experience to identify risks and potential hazards when working with the product. Qualified personnel are also able to understand
and follow the given safety and warning notices.
Intended use
The product described in this document may be used only for the application specified. The maximum electrical supply data and ambient con-
ditions specified in the technical data section must be adhered. For the perfect and safe operation of the device proper transport and storage as
well as professional assembly, installation, handling and maintenance are required.
Disclaimer of liability
The content of this document has been reviewed to ensure correctness. Nevertheless it may contain errors or inconsistencies and we cannot
guarantee completeness and correctness. This is especially true for different language versions of this document. This document is regularly
reviewed and updated. Necessary corrections will be included in subsequent version and are available via our webpage www.camillebauer.com.
Feedback
If you detect errors in this document or if there is necessary information missing, please inform us via e-mail to:
[email protected]
Table of contents
1. Introduction
……………………………………………………………………………………………… 4
1.1 Purpose of this document ………………………………………………………………………………………… 4
1.2 Scope of supply ……………………………………………………………………………………………… 4
1.3 Further documents ……………………………………………………………………………………………… 4
2. Safety and warning notes …………………………………………………………………………………………… 4
3. Device overview
……………………………………………………………………………………………… 5
3.1 Brief description ……………………………………………………………………………………………… 5
3.2 Available measurement data ……………………………………………………………………………………… 5
4. IInstallation and commissioning …………………………………………………………………………………… 5
4.1 Mechanical installation …………………………………………………………………………………………… 6
4.1.1 Panel cut out ……………………………………………………………………………………………… 6
4.1.2 Mounting of the device ……………………………………………………………………………………… 6
4.1.3 Demounting of the device ……………………………………………………………………………………… 6
4.2 Electrical connections ……………………………………………………………………………………………… 6
4.2.1 Possible cross sections and tightening torques ………………………………………………………………… 7
4.2.2
Inputs
……………………………………………………………………………………………… 7
4.2.3 Power supply ……………………………………………………………………………………………… 7
4.2.4 Modbus interface RS485 ……………………………………………………………………………………… 7
4.3 Commissioning
…………………………………………………………………………………………… 8
4.3.1 Operating the device ……………………………………………………………………………………… 8
4.3.2 LED indications ……………………………………………………………………………………………… 8
4.3.3 Measurement reding screens ………………………………………………………………………………… 9
4.3.4 Timer screen ……………………………………………………………………………………………… 10
4.3.5 Number of interruptions ……………………………………………………………………………………… 10
4.3.6 On hour
……………………………………………………………………………………………… 10
4.3.7 Run hour
……………………………………………………………………………………………… 10
5. Setup screens
……………………………………………………………………………………………… 12
6. Programming
……………………………………………………………………………………………… 13
6.1 Password protection ……………………………………………………………………………………………… 13
6.2 System Parameter selection screen ………………………………………………………………………………… 13
6.2.1 Automatic voltage detection …………………………………………………………………………………… 13
