K11208a;34/36
- 34 -
●
Vertical timing: High speed/preset shutter/asynchronous shutter/normal scan/with H-reset
ＨＤ
ＦＤＶ
Ｖｉｎ ｉｔ
Exposure time（ｎＨ）
ＳＴＲ Ｂ
Exposure period（ｎＨ）
Dihgital output
（ＣＨ １，２）
※ n is the integer value defined by the
shutter switch position.
(In te rn al ho rizon tal
sync signa l)
Eff ect ive im age
１
８
３
１ ０ ４ ０
1
2
3
1 03 8
10 3 9
10 4 0
End fo exposure(SG)
４２ ～ ４３ Ｃ Ｌ Ｋ
１０ ２ ＣＬ Ｋ
* Unless otherwise specified, the time unit of the numbers in the horizontal timing chart is pixel CLK (= 1/60.0MHz = 16.7nS).
* The operation timing when Vint is detected is the same both for preset shutter and pulse width control.
* The numbers shown here are design values, and the actual equipment should be checked for the details.
●
Vertical timing: Low speed (long exposure)/preset shutter/continuous/normal scan
Timing of long exposure mode
Internal signal
(internal
operation)
Image output
VD
(Vertical synch
signal)
Exposure time
(nV)
FDV
Image signal
(digital)
1V=1068
Exposure time (nV)
Image (P) / exposure time
11
Image (P – 1)
Effective image duration (1040)
Image (P+1) / exposure time
Image (P)
Image (P+1
Effective image duration (1040)
* The detailed vertical timings of the respective effective image duration are the same as those of “Vertical timing for
continuous shutter and without shutter”.
(Note) The long exposure operation is not compatible with the partial scanning.
(Note)The asynchronous shutter operation is not supported for the long exposure operation.
