CAMERA LINK ADIMEC-1000m Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 67

CAMERA LINK ADIMEC-1000m Скачать руководство пользователя страница 17

15

2.2.3 Cleaning of the camera.

The camera shall NEVER be immersed in water or any other fluid. For cleaning, only use a light moist tissue.

2.2.4 Maintenance

No specific maintenance other than cleaning is applicable.

2.2.5 Repair and modification

Repair, modification and replacement of parts shall be done only by Adimec to maintain compliance with the
directive 89/336/EEC electromagnetic compatibility.

2.2.6 Mounting / Mechanical

2.2.6.1

2.2.6.1

2.2.6.1

2.2.6.1

C

C

C

Connectors

onnectors

onnectors

onnectors

Take care during handling of the camera. The Camera Link connector and the power connector should not be
damaged. The maximum tightening torque for the Camera Link connector may not exceed 0.26 Nm. Prevent the
entry of foreign objects or dirt to the connectors, as this will result in unreliable operation or damage.

2.2.6.2

2.2.6.2

2.2.6.2

2.2.6.2

Mounting screws

Mounting screws

Mounting screws

Mounting screws

Take notice of the maximum length of the screws that may be used for mounting of the camera. Using too long
screws can cause damage to the camera. Maximum screw length: 5 mm

Refer to chapter 10 for details.

«
...
15
16
17
18
19
...
»

Содержание ADIMEC-1000m




































































Отзывы:

Нет отзывов