Cameo OPUS S5, Руководство пользователя

Страница: 11 / 100

11
DMX
DEUTSCH
FRANCAIS
ESP
AÑOL
ENGLISH
IT
ALIANO
POLSKI
SYSTEM SETTINGS (Settings)
Starting from the main display, press ENTER to go to the main menu. Use the UP and DOWN control keys to select the System Settings
menu and press ENTER.
This will take you to the submenu for setting the submenu options, see table (select via UP and DOWN, confirm via ENTER, change status via
UP and DOWN, confirm via ENTER):
Settings (bold = factory setting)
Display Display settings Reverse OFF Display does not rotate
ON Display rotates by 180° (when installed
overhead)
Backlight OFF Deactivates display backlight after approx. 30
seconds of inactivity
ON Display backlight permanently on
DMX Fail Operating mode for DMX
signal interruption
Black activates Blackout
Hold Last command is held
Auto Activates Auto mode
Dimmer Curve Select the dimmer curve Linear The light intensity climbs linearly with the DMX
value
Exponential The light intensity can be set finely in the lower
DMX value range and roughly in the upper DMX
value range
Logarithmic The light intensity can be set roughly in the lower
DMX value range and finely in the upper DMX
value range
S-curve The light intensity can be set finely in the lower
and upper DMX value ranges and roughly in the
medium DMX value range
LED Frequency Sets the LED PWM frequency 650Hz , 1530Hz,
3600Hz, 12KHz,
25KHz