Cameo OPUS S5, Руководство пользователя

Страница: 9 / 100

9
DMX
DEUTSCH
FRANCAIS
ESP
AÑOL
ENGLISH
IT
ALIANO
POLSKI
NETWORK SETTINGS (Network)
Starting from the main display, press ENTER to go to the main menu. Use the UP and DOWN control keys to select the Control menu and
press ENTER. Using the UP and DOWN buttons, now select the “Network” menu option and confirm via ENTER. Network settings information
can be found in the following table. Confirm all network settings changes via ENTER.
W-DMX SETTINGS (Wireless)
Starting from the main display, press ENTER to go to the main menu. Use the UP and DOWN control keys to select the Control menu and
press ENTER. Using the UP and DOWN buttons, now select the “Mode” menu option and confirm via ENTER. W-DMX settings information
can be found in the following table. Confirm all changes made to the settings via ENTER.
Wireless
W-DMX OFF Deactivate W-DMX
ON Activate W-DMX
Operating
(currently in beta)
Receiver W-DMX module configured as receiver
Transmitter W-DMX module configured as transmitter
Transmitting
(currently in beta)
G3 G3 transmission standard
G4S G4S transmission standard
Link Link Link with W-DMX devices. W-DMX must be active for all devices and the link with a transmit-
ter must be suspended (Receive Reset)
UnLink Unlink all devices
Receive Reset NO Do not suspend link with a transmitter
YES Suspend link with a transmitter
Network
Network
Input
Activate / deactivate network input OFF Network input deactivated
ON Network input activated
Protocol Network protocol ArtNET ArtNet protocol
sACN sACN protocol
Address Universe 1 - 256,
configure IP address and subnet mask
Universe
000 - 255
000 to 255. Change value via LEFT and RIGHT,
confirm via ENTER.
IP address Select Block via LEFT and RIGHT, change value
via UP and DOWN, confirm with ENTER.
IP Subnet Mask Select Block via LEFT and RIGHT, change value
via UP and DOWN, confirm with ENTER.
DMX OUT Output network signal via DMX OUT OFF Do not output signal
ON Output signal