8
DMX
IT
ALIANO
POLSKI
ESP
AÑOL
FRANCAIS
DEUTSCH
ENGLISH
STANDALONE MODE STATIC (Static)
Select the mode “Static” ias previously described in STANDALONE MODES and confirm with ENTER. Overall brightness,
strobe, amber, cool white (C White) and warm white (W White) can now be configured separately to create an individual scene.
Menu structure
StaAlone
Static
ENTER
UP/DOWN
Static
Intens
/
Static
Strobe
/
Static
Amber
/
Static
C White
/
Static
W White
ENTER - UP / DOWN
ENTER - UP / DOWN
ENTER - UP / DOWN
ENTER - UP / DOWN
ENTER - UP / DOWN
Intens
000 - 255
Strobe
000 - 255
Amber
000 - 255
C White
000 - 255
W White
000 - 255
ENTER
ENTER
ENTER
ENTER
ENTER
Please refer to values and descriptions of the stroboscope function as listed in the table below:
Strobe
Values
Description
000 – 005
Strobe open
006 – 010
Strobe closed
011 – 033
Pulse random, slow -> fast
034 – 056
Ramp up random, slow -> almost
057 – 079
Ramp down random, slow -> almost
080 – 102
Random Strobe Effect, slow -> fast
103 – 127
Strobe Break Effekt, 5s…..1s (Short burst with break)
128 – 250
Strobe slow -> fast <1Hz - 20Hz
251 - 255
Strobe open
SLAVE MODE
Press the MODE button repeatedly until "Menu" is displayed on the top line of the display. Use the UP and DOWN keys to select the menu item
“Slave" and press ENTER. The slave mode is now enabled. Connect the slave and the master units (same model) with a DMX cable and enable
one of the standalone modes on the master unit (Auto, Sound, CCTMacro, TunWhite, Static). Now the slave unit will follow the master unit.
Additional note: If a stand-alone mode is enabled, ensure that no DMX controller is connected.
Menu
Slave
ENTER
SYSTEM SETTINGS (settings)
Press the MODE button repeatedly until "Menu" is displayed on the top line of the display. Use the UP and DOWN keys to select the menu
item “Settings" and press ENTER. To edit settings, select the desired submenu item with the buttons UP and DOWN and confirm with ENTER
(see tables, note submenus).
Settings
Display Backlight
=
Display lighting
On
On permanently
Off
Deactivation after approximately 1 minute of inactivity
DMX Fail
=
operating status
with DMX signal
fault
Hold
Last command is retained
Blackout
Activates blackout
