23
CAMEC ELITE
®
2
EM303
Ref: ELITE 2 EM303-0715Rev.A.
In general, all error messages will reset automatically after one minute. If this is not the case, reset the electronics
of the manoeuvring system by switching off the manoeuvring system via the isolation switch and the remote
control handset for at least 15 seconds and then turn them on again.
Roller will not turn, spindle rotates freely:
•
The motor or gear is broken, please contact your
Camec Elite
®
2
EM303 supplier.
Rollers slip on wheels:
•
Check distance of rollers to tyres. You can move the rollers closer to the tyre. In certain circumstances, one of
the caravan’s wheels may be moving on a surface with less traction than the other, in which case, you can
move the rollers closer to the tyre.
In case of any doubt, please call your Camec Elite
®
2 EM303 supplier.
