background image

Page 

5

 - Manual 

FA01625-EN

  - 02/2023 - © C

AME S.p.A. - The contents of this manual may be changed at any time and without notice. - T

ranslation of the o

riginal instructions

PRODUCT DATA AND INFORMATION

Key

 This symbol shows which parts to read carefully.

 This symbol shows which parts describe safety issues.

 This symbol shows what to tell users.

The measurements, unless otherwise stated, are in millimetres.

Description

001G6000

Barrier made of painted galvanized steel designed to fit accessories.

001G6001

Barrier made of AISI 304 satin-finish steel, designed to fit accessories.

001G6001-316

Barrier made of AISI 316 satin-finish steel, designed to fit accessories.

001G6000X

Barrier made of galvanized steel with customised RAL paint designed to fit accessories.

001G600Y

Barrier made of RAL 1023 painted galvanized steel designed to fit accessories.

001G6010

Barrier made of painted galvanized steel set up to fit accessories. The barrier includes balance springs (2 x 001G04060).

001G6010X

Barrier made of galvanized steel with customised RAL paint designed to fit accessories.

Intended use

Ideal solution for apartment blocks and industrial use.

 Any installation and/or use other than that specified in this manual is forbidden.

Usage limitations

MODELS

G6000

G6001

G6001-316

G6000X

G6000Y

G6010

G6010X

Max. net clearance width (m)

6,5

6,5

6,5

6,5

6,5

6,5

6,5

Technical data

MODELS

G6000

G6001

G6001-316

G6000X

G6000Y

G6010

G6010X

Power supply (V - 50/60 Hz)

230 AC

230 AC

230 AC

230 AC

230 AC

120 AC

120 AC

Motor power supply (V)

24 DC

24 DC

24 DC

24 DC

24 DC

24 DC

24 DC

Power (W)

300

300

300

300

300

300

300

Current draw (A)

15 Max.

15 Max.

15 Max.

15 Max.

15 Max.

15 Max.

15 Max.

Colour

2004

-

-

RAL X

1023

2004

RAL X

Operating temperature (°C)

-20 ÷ +55

-20 ÷ +55

-20 ÷ +55

-20 ÷ +55

-20 ÷ +55

-20 ÷ +55

-20 ÷ +55

Storage temperature (°C)*

-25 ÷ +45

-25 ÷ +45

-25 ÷ +45

-25 ÷ +45

-25 ÷ +45

-25 ÷ +45

-25 ÷ +45

Torque (Nm)

600

600

600

600

600

600

600

Opening time at 90° (s)

4 ÷ 8

4 ÷ 8

4 ÷ 8

4 ÷ 8

4 ÷ 8

4 ÷ 8

4 ÷ 8

Duty cycle (%)

HEAVY-DUTY 

SERVICE

HEAVY-DUTY 

SERVICE

HEAVY-DUTY 

SERVICE

HEAVY-DUTY 

SERVICE

HEAVY-DUTY 

SERVICE

HEAVY-DUTY 

SERVICE

HEAVY-DUTY 

SERVICE

Protection rating (IP)

54

54

54

54

54

54

54

Insulation class

I

I

I

I

I

I

I

Average life (cycles)**

1.000.000

1.000.000

1.000.000

1.000.000

1.000.000

1.000.000

1.000.000

(*) Before installing the product, keep it at room temperature where it has previously been stored or transported at a very high or very low temperature.
(**) The average product life specified should be understood purely as an indicative estimate. It applies to normal usage conditions and where the product has been 
installed and maintained in compliance with the instructions provided in the CAME technical manual. The average product life is also affected, including significantly, 
by other variables such as, but not limited to, climatic and environmental conditions. The average product life should not be confused with the product warranty.

Fuse table

MODELS

G6000

G6001

G6001-316

G6000X

G6000Y

G6010

G6010X

Line fuse

1.6 A-F

1.6 A-F

1.6 A-F

1.6 A-F

1.6 A-F

3.15 A-F

3.15 A-F

Accessory fuse

2 A-F

2 A-F

2 A-F

2 A-F

2 A-F

2 A-F

2 A-F

Control board fuse

1 A-F

1 A-F

1 A-F

1 A-F

1 A-F

1 A-F

1 A-F

Содержание GARD G6000

































Отзывы: