7
OPERATOR SPECIFICATIONS
This model is intended for use in vehicular swing gate applications:
Gate Classifications:
CLASS I
Main AC Supply:
120 Vac, 50/60Hz
Input Rating:
500 Watts at 120Vac
Main Supply (Motor):
7.5 Amps at 24Vdc
Maximum Torque:
320N
Cycle Time:
12 seconds 90 degree open @ 100% speed
15 seconds 90 degree close @ 100% speed
Gear ratio:
1/1152
Accessory Power:
24 Vac nominal Class II limited to 37W
Maximum Gate Weight/Length:
850 lbs. at 12ft.
Maximum Opening:
110 degrees
Daily Cycle Rate AC power:
Continuous duty
Ambient Temperature:
-20°C to 55°C (-4°F to 131°F)
Fuse Protection Motor:
10 Amp
Fuse Protection Accessories:
2 A
Fuse Protection Control Board:
630 mA-F
Fuse Protection Electrolock:
3.15 A
Fuse Protection Line:
5 A
* The company CAME Cancelli Automatici is ISO 9001:2000 quality certified; it has
also obtained the ISO 14001 environmental safeguarding certification. CAME
engineers and manufactures all of its products in Italy.
This product complies with the following standards: UL-325 and CSA C22.2 NO.247-
92.
INTRODUCTION
OPERATOR SPECIFIC CARTON INVENTORY
In-Ground Case
Control Panel
Manual Release
Gearmotor
Curved Arm
Gate Arm
Gate Bracket
Cover
Hardware
CARTON INVENTORY
NOT SHOWN:
Hardware for control panel and manual
Warning Signs (2)
