23
MENU DESCRIPTIONS
MAIN MENU
SUB MENU
DESCRIPTION
USERS
The USERS menu is used to program remote controls.
Add User
Add User:
To create a new user and assigned function (max. 250 users).
Mod. name
Mod. Name:
To change a user number or existing name to another name.
Mod. code
Mod Code:
To change a user
ʼ
s current code.
Related Func
Related Function:
To change the function assigned to the user.
Remove Usr.
Remove User:
To remove an existing user. Confirm the use you wish to remove with the ENTER button.
Delete all Usr
Delete all users:
To cancel all registered users. Con
fi
rm cancellation of all users with ENTER button.
Backup data
Backup data:
To save the users in the memory roll. Con
fi
rm saving of users on the memory roll with ENTER button.
Restore backup
Restore backup:
To load the data saved on the memory roll onto card (if the card is of the same version it loads both users and
settings, otherwise it only loads the users).
INFO
Info Menu
Version
Version:
To view software version.
Number of gate runs:
To view the number of runs performed by the operator.
Standby Mssg:
To view the starting message, confirm with ENTER to change text. Use the ENTER button to move the cursor forward,
ESC to move it backwards and <> to select the letter of number. Confirm the text by pressing the ENTER key for a few seconds.
System reset:
Resets the system to the original factory settings. Press ENTER key to confirm.
TEST MOT.
Motor Test Menu
TEST MOT.
MOT TEST.:
The MOT test checks that gearmotors are rotating in the proper direction.
M1: Gate leaf opening run of the first (M1) gearmotor. If the direction is wrong, invert the motor
ʼ
s phases.
M2: Gate leaf opening run of the second (M2) gearmotor. If the direction is wrong, invert the motor
ʼ
s phases.
PROGRAMMING
