CAME 002ZL60, Руководство по установке

Страница: 24 / 64

10 11 E M1
A B 1 2 3P 7
10 TS 2 C1 CX
2
1
M2
M1
M1 N1 ENC1 M2 N2 ENC2
p.
8
- M
an
u
al
FA
01
04
0-
EN
- 0
2
/2
0
1
8
- © C
A
M
E S
.p.
A
. - T
h
e c
onte
nts of th
is
m
an
u
al
m
ay b
e c
h
an
g
ed, at a
ny ti
m
e, a
n
d w
ith
ou
t n
oti
ce
.
⚠
WARNING! Before fi tting any plug-in card, such as the AF or R800 one, YOU MUST CUT OFF THE MAINS
POWER SUPPLY and, if present, disconnect any batteries.
Keypad selector.

Apply a ferrite to the gearmotor cables inside of the control panel. It should
be a FAIR-RITE type material 31 mod.
2631102002, and is not supplied.
Output for connecting either fl ashing or cycle light.
(Contact rated for: 24 V AC/DC - 25 W max.).
R800 card connector (the R800 card connector is for using
the keypad selector).
OPEN-CLOSE-INVERT function (step-step) from control device
(NO contact). Alternatively, from functions programming you
can activate the OPEN-STOP-CLOSE-STOP command.
STOP button (NC contact). For stopping the gate while
excluding automatic closing. To resume movement press the
control button or use another control device.
If unused, it should be deactivated during programming.
Connector for AF card (AF868 or AF43S) for remote control.
PARTIAL/PEDESTRIAN OPENING function from control
device (NO contact).
Antenna with RG58 cable for remote control.
Command and control devices
M1 opens second
Connecting the gearmotor to the Encoder
M2 closes second
Warning device