background image

Page 1 of 9

CX-DE1200  

Delayed Egress Electro Magnetic Lock 

Special Locking Arrangement

INSTALLATION INSTRUCTIONS

Electrified Locks, Relays and Timers

1- CX-DE1200 Electro Magnetic Lock Housing 
assemble with main controller PCB & Magnetic Plate
1- Mounting Template
4- Adhesive door signage

1- Installation Instructions & Wiring Diagrams
1- Armature Plate Assembled Housing 
    & Proxy Trigger
1- Electro Magnetic Lock Screw Packaging

THIS PACKAGE INCLUDES:  

1. DESCRIPTION 

Intended for use in an Indoor location - Out Swing.

 

When an unauthorized exit is trigger, the delays exit through 

the door for a period of 15 or 30 seconds. An LED bar segment 

display countdown by seconds and voice messages to inform 

the person planning to exit with the remaining times to unlock. 
In the meantime, the person exiting must wait to allow time for 

security personnel or staff to respond. The door will eventually 

unlock after the 15 or 30 seconds delay time has passed, 

permitting the exit. During an emergency, a signal from the 

fire/life safety system will release the lock promptly. 

2. SPECIFICATIONS

Voltage

12/24V DC +/- 10% (Auto Sensing)

Power Suplly must be UL 294 or 

UL 603 Listed with a Class 2, power 

limited output

Current Draw

600mA / 350mA 

Lock Output

12/24 VDC, 1A

Lock Status Relay 

Rating 

Max. *

30 VDC, 2A, 1 pF

Alarm Output 

Rating 

Max. *

30 VDC, 2A, 1 pF

DPS Rating 

Max. *

30 VDC, 0.1A, 1 pF

Bond Sensor Rating 

Max. *

30 VDC, 2A, 1 pF

ATS Rating 

Max. *

30 VAC / 42.4 VDC, 5A,  1 pF

Operating Temperature

0~55°C  (32~131°F)

Operating Humidity

0~95%  (non-condensing)

Dimensions 

(Lock)

11” H x 3” W x 3” D 

(280mm x 76mm x 74.5mm)

Dimensions 

(Armature Plate)

11” H x 2-5/8” W x 1” D 

(280mm x 68mm x 23.5mm)

3. DIMENSIONS 

PUSH UNTIL ALARM SOUNDS. 

DOOR CAN BE OPENED 

IN 15 SECONDS.

PUSH UNTIL ALARM SOUNDS. 

DOOR CAN BE OPENED 

IN 30 SECONDS.

KEEP PUSHING. 

THIS DOOR WILL OPEN 

IN 15 SECONDS. 

ALARM WILL SOUND.

KEEP PUSHING. 

THIS DOOR WILL OPEN 

IN 30 SECONDS. 

ALARM WILL SOUND.

Building & Fire Life Safety Code Compliant:

IBC

 International Building Code

NFPA

 

101

 Life Safety Code

NFPA 1

, UFC Uniform Fire Code

CBC

 California Building Code

BOCA

 National Building Code

Chicago

 Building Code

THIS PRODUCT MUST BE CONNECTED INTO A FIRE ALARM SYSTEM PER NFPA 

CODE OR OTHER REGULATIONS SO THAT, IN THE EVENT OF FIRE, THE TIME 

DELAY WILL BE BYPASSED. CONTACT YOUR LOCAL CODE AUTHORITY TO VERIFY 

COMPLIANCE WITH FIRE AND BUILDING CODES. THE DELAYED EGRESS DEVICE 

SHOULD BE ROUTINELY CHECKED FOR PROPER OPERATION AND COMPLIANCE 

WITH FIRE AND BUILDING CODES.

Note: * Separately-energized

UL 294 Access Control 

Performance Levels:

Levels:

Access Control Line Security

Level I

Destructive Attack

Level I

Endurance

Level IV

Standby Power

Level I

Содержание CX-DE1200










Отзывы: