Cambium Networks PMP 450, Конфигурация и руководство пользователя

Страница: 98 / 196

Task 5: Configuring security Chapter 2: Configuration and alignment
2-66
pmp-0050 (May 2012)
Where additional security is more important than ease of network administration, you can disable all remote
access to a module as follows. After this procedure, no access to the module is possible through HTTP, SNMP,
FTP, or telnet over an RF link.
To deny remote access to the module, perform the following steps:
1
Insert the override plug into the RJ-11 GPS utility port of the module
2
Power up or power cycle the module
3
Access the web page http://169.254.1.1/lockconfig.html
4
Click the checkbox
5
Save the changes
6
Remove the override plug
7
Reboot the module
Reinstating Remote Access Capability
Where ease of network administration is more important than the additional security that the No Remote
Access feature provides, this feature can be disabled as follows. After this procedure, access to the module is
possible through HTTP, SNMP, FTP, or telnet over an RF link.
To reinstate all remote access to the module, perform the following steps:
1 Insert the override plug into the RJ-11 GPS utility port of the module
2 Power up or power cycle the module
3 Access the web page http://169.254.1.1/lockconfig.html
4 Click the check box to uncheck the field
5 Save the changes
6 Remove the override plug
7 Reboot the module