Cambium Networks PMP 450, Конфигурация и руководство пользователя, Страница: 102 / 196

Task 5: Configuring security Chapter 2: Configuration and alignment
2-70
pmp-0050 (May 2012)
Protocol Filtering tab of the AP
Table 29 Protocol Filtering tab of the AP
In the Protocol Filtering tab of the AP, you may set the following parameters.
Table 30 AP Protocol Filtering attributes
Attribute Meaning
Packet Filter Types
For any box selected, the Protocol and Port Filtering feature blocks the
associated protocol type.
To filter packets in any of the user-defined ports, you must do all of the
following:
Check the box for
User Defined Port n (See Below) in the Packet Filter
Types section of this tab.
In the User Defined Port Filtering Configuration section of this tab, both
provide a port number at Port # n .
check TCP , UDP , or both.
Filter Direction Operators may choose to filter upstream (uplink) RF packets or
downstream (downlink) RF packets.
User Defined Port Filtering
Configuration You can specify ports for which to block subscriber access, regardless of
whether NAT is enabled.