Cambium Networks PMP 450, Конфигурация и руководство пользователя

Страница: 93 / 196

PMP 450 Configuration and User Guide Task 5: Configuring security
pmp-0050 (May 2012)
2-61
Figure 10 RJ-11 pinout for the override plug
Pin
1 white / orange
Pin
1
Pin
2 white / green
Pin
2
Pin
3 white / blue
Pin
3
Pin
4 green
Pin
6
Pin
5 blue Pin 5
Pin
6 orange Pin 4
Using the Override Plug
While the override plug is connected to a module, the module can neither register nor allow registration of
another module.
To regain access to the module, perform the following steps.
1
Insert the override plug into the RJ-11 GPS utility port of the module.
2
Power cycle by removing, then re-inserting, the Ethernet cable.
RESULT: The module boots with the default IP address of 169.254.1.1, password fields blank, and
all other configuration values as previously set.
3
Wait approximately 30 seconds for the boot to complete.
4
Remove the override plug.
5
Set passwords and IP address as desired.
6
Change configuration values if desired.
7
Click the Save Changes button.
8
Click the Reboot button.
Requiring SM Authentication
Through the use of Prizm, a shared AP key, a BAM (Bandwidth and Authentication Manager) server, or an
external RADIUS (Remote Authentication Dial In User Service) server, you can enhance network security by
requiring SMs to authenticate when they register. Three keys and a random number are involved in
authentication as follows:
factory-set key in each SM. Neither the subscriber nor the network operator can view or change this key.