Cambium Networks PMP 450, Конфигурация и руководство пользователя, Страница: 62 / 196

Task 2: Configuring IP and Ethernet
interfaces Chapter 2: Configuration and alignment
2-30
pmp-0050 (May 2012)
Attribute Meaning
Active Configuration, SM
Management VID Pass-
Through This is the value of the parameter of the same name, configured
above.
Active Configuration,
Dynamic Ageing Timeout This is the value of the VLAN Aging Timeout parameter
configured above.
Active Configuration, Allow
Learning Yes is displayed if the value of the Dynamic Learning parameter
above is Enabled . No is displayed if the value of Dynamic
Learning is Disabled .
Active Configuration, Allow
Frame Type This displays the selection that was made from the drop-down
list at the
Allow Frame Types parameter above.
Active Configuration, QinQ This is set to Enabled if VLAN Port Type is set to QinQ , and is set
to Disabled if VLAN Port Type is set to Q .
Active Configuration, QinQ
EthType This is the value of the QinQ EtherType configured in the AP.
Active Configuration, Allow
QinQ Tagged Frames This is the value of Accept QinQ Frames , configured above.
Active Configuration,
Current VID Member Set,
VID Number
This column lists the ID numbers of the VLANs in which this
module is a member, whether through assignment or through
dynamic learning.
Active Configuration,
Current VID Member Set,
Type
For each VID number in the first column, the entry in this
column correlates the way in which the module became and
continues to be a member:
Permanent —This indicates that the module was assigned the
VID number through direct configuration by the operator.
Dynamic —This indicates that the module adopted the VID
number through enabled dynamic learning, when a tagged
packet from an SM behind it in the network, or from a customer
equipment that is behind the SM in this case, was read.