Calspas 6115, Руководство пользователя

Страница: 35 / 302

2011 Portable Spa
LTR20111001, Rev. B
Cleaning and Maintenance
www.calspas.com
34
All-Purpose Cleaner (Spa finish
cleaning)
All-Purpose Cleaner is an essential part of maintaining
your spa’s finish. Through normal use, the spa’s finish
can accumulate dirt, oil, and calcium causing a rough
feel and unsightly scum lines. All-Purpose Cleaner
is a low detergent, non-abrasive cleaner specifically
formulated to clean the spa without damaging its
acrylic finish.
The most effective solution to minimize cleaning time
is prevention. When the following steps are followed,
the spa’s finish will actually start to resist most of the
elements that cause calcium build-up and make scum
line clean up easier.
Prior to Spa Start-Up and Refilling
Spray Multi-Purpose Cleaner directly on to the 1.
spa’s finish.
Wipe clean with a clean soft cloth. 2.
Repeat on heavily calcified areas. 3.
Wipe spa thoroughly with a wet sponge, rinsing 4.
often with a bucket of clean water.
Allow spa to dry completely.
5.
Apply a coat of Fast Sheen to the spa’s entire finish 6.
with a soft towel or sponge.
Allow Fast Sheen to dry until white and powdery.
7.
Buff clean with a soft cloth, rotating frequently. 8.
Periodic Maintenance
Spray Multi-Purpose Cleaner directly to the spa’s 1.
finish.
Wipe clean with a clean soft cloth. 2.
Wipe spa thoroughly with a wet sponge, rinsing 3.
often in a bucket of clean water.
Multi-Purpose Cleaner should not be sprayed directly
into the spa water. Incorrect usage of this product will
cause water clarity issues.
Fast Sheen (Spa finish protecting wax)
Fast Sheen is an essential part of maintaining your
spa’s finish. Through normal use, the spa’s finish can
accumulate dirt, oil, and calcium, causing a rough feel
and unsightly scum lines. Fast Sheen is a non-oil based
wax that is specifically formulated to protect the spa’s
finish from the chemicals and minerals associated with
normal spa use.
The most effective solution to minimize cleaning time
is prevention. When the following steps are followed,
the spa’s finish will actually start to resist most of the
elements that cause calcium build-up and make scum
line clean-up easier.
Prior to Spa Start-Up and Refilling
Spray Multi-Purpose Cleaner directly to the spa’s 1.
finish.
Wipe clean with a soft cloth. 2.
Repeat on heavily calcified areas. 3.
Wipe spa thoroughly with a wet sponge, rinsing 4.
often in a bucket of clean water.
Allow the spa to dry completely.
5.
Apply a coat of Fast Sheen to the spa’s entire finish 6.
with a soft cloth or sponge.
Allow Fast Sheen to dry until white and powdery.
7.
Buff clean with a soft cloth, rotating frequently. 8.
IMPORTANT: Fast Sheen should not be used on spas
full of water. Only apply to clean, cool, dry surfaces.
Incorrect product usage may cause water clarity
issues.