26
18. Lights
Programming a Lights Schedule
STOP
LIGHTS SCHEDULING & MANUAL OPERATION
L1:
Schedule for :
ON TIMES:
10:00PM
OFF
OFF TIMES:
11:30PM
OFF
Sep 17 2002, Tue
Status : MANUALLY TURNED ON
Time Remaining is 3:57:25 (hh:mm:ss)
If the optional Lights Program is installed on a controller, the
LIGHTS
Menu Key will be available at the Main Menu screen. The
Lights Scheduling & Manual Operation screen appears (as shown above). You can set a 14-day schedule of two separate on
and off times for each of the four available light circuits (L1 through L4). You can also run a manual test (described in the next
section).
Select the light circuit you wish to program by Pressing the
STATION UP
or
STATION DOWN
Key until the desired light circuit is
displayed in the upper left corner of the screen (L1 has been selected in the example above). Press an
ARROW
Key to move the
cursor to highlight the first ON TIME setting, Press the
PLUS
or
MINUS
Key to set the desired time, Press an
ARROW
Key to
move the cursor to first OFF TIME setting, Press the
PLUS
or
MINUS
Key to set the time, repeat the process if a second ON/
OFF TIME is desired. This only completes the programming for first day of the 14-day schedule. Press an
ARROW
Key to move
the cursor to the date (the current date is always initially displayed), Press the
PLUS
Key to change the date to the second day of
the 14-day schedule, set the ON/OFF TIMES as described above, repeat this process until all 14 days have been programmed.
This schedule will continually repeat itself every 14 days.
Testing a Lights Circuit
Station Up Key
Station Down Key
S
TATION U
P
Test
LIGHTS SCHEDULING & MANUAL OPERATION
L1:
Schedule for :
ON TIMES:
10:00PM
OFF
OFF TIMES:
11:30PM
OFF
Sep 17 2002, Tue
Status: OFF
To turn on a lights circuit for testing purposes, select the light circuit you wish to test by Pressing the
STATION UP
or
STATION
DOWN
Key, then Press the
TEST
Menu Key (shown in the example at the top of this page), the screen will appear as shown
above, the Status will show that the circuit has been turned on manually. The length of time for a test is 4 hours, Time Remaining
will continually display how much time remains of the test cycle. To end the test cycle before the remaining time has expired,
Press the
STOP
Menu Key.
19. Radio Remote
Enable Radio Remote NOW
RADIO REMOTE ACTIVATION
Code for NORMAL COMMANDS is : * 1 1
Code for ADDRESSED COMMANDS is : * -
Receive Channel : 5 (160.150Mhz)
1
If the optional Radio Remote Control is installed on a controller, the
RADIO REMOTE
Menu Key will be available at the Main
Menu screen. The Radio Remote Activation screen appears (shown above). Press the
ENABLE RADIO REMOTE NOW
Menu
Key to activate the controller for radio remote control. You can also set Normal Command Codes, Addressed Command Codes
and the receiver frequency at this screen
(see the instructions that are shipped with the Calsense Radio Remote for more
information)
.
