Calsense ET2000, Руководство по программированию

Страница: 21 / 26

21
DIAGNOSTICS
08/28 04:23PM Sta 3 Time 10.0 to 12.0
08/28 04:22PM Sta 5 Time 15.0 to 17.0
08/28 04:20PM Sta 12 Time 15.0 to 18.0
08/26 01:33PM CHANGE : NO Water Days
08/26 11:18AM Resumed - TEST OVER
08/26 11:18AM STOP KEY PUSHED
08/26 11:01AM Paused due to TEST
07/28 08:33AM CHANGE : PROG A Water Days
07/28 08:30AM CHANGE : PROG B Water Days
07/22 10:32PM NO CURRENT for Stn 3
07/22 10:11PM NO CURRENT for Stn 12
06/28 07:38AM Program Restart
06/28 06:02AM Power Fail
Diagnostics (shown above) keeps a record of all program changes made to the controller and all alerts generated by the controller.
Press the
PLUS or MINUS Key to scroll up or down to view all the data contained at the Diagnostics screen.
Irrigation Details
Clear Station
IRRIGATION DETAILS
STN HOLD-OVER TO IRRIG STATUS
Clear Hold-Over
2 0.0 8.5 Irrigating
3 8.3 5.0 Soaking
4 0.0 10.0 Waiting
5 0.0 10.0 Waiting
6 0.0 0 . 0
7 (station not in use)
8 (station not in use)
1 0.0 10.0 Waiting
STATION ORDER
Turn-on order of Stations during
scheduled irrigation
(shown in order they turned on)
-- -- -- -- -- -- -- -- -- --
-- -- -- -- -- -- -- -- -- --
-- -- -- -- -- -- -- -- -- --
-- -- -- -- -- -- -- -- -- --
-- -- -- -- -- -- -- -- -- --
-- -- -- -- -- -- -- -- -- --
-- -- -- -- -- -- -- -- -- --
-- -- -- -- -- -- 2 1 3 4
5 6 7 11 10 9 12 8 2 1
3 4 5 6 7 11 10 9 12 8
Irrigation Details (shown above) will report every station’s current status. In the example above, stations 1 through 5 are currently
in an irrigation cycle, station 6 is inactive and stations 7 and 8 are not being used (they have been turned off at the Station In Use
screen). Station 2 is irrigating and has 8.5 minutes left to irrigate. Station 3 has completed an irrigation cycle and is in a soak-in
cycle, it also has 8.3 minutes of hold-over time. Stations 1, 4 and 5 are waiting to start their first irrigation cycle.
You can use the Irrigation Detail screen to view the current status of any station, you can also clear a station from it’s current
irrigation cycle, test cycle or manual cycle, by Pressing the
PLUS or MINUS Key until the desired station is highlighted, then
Press the CLEAR STATION Menu Key, the station will be cleared and the next station will begin. You can also clear a station’s
hold-over time by Pressing the PLUS or MINUS Key until the desired station is highlighted, then Press the CLEAR HOLD-OVER
Menu Key.
Station Order
The ET2000 does not necessarily irrigate in sequence, and sometimes it might be necessary to know the order in which the
stations on the controller irrigated. You can view the order in which each station irrigated at the Station Order screen. Starting in
the lower right corner of the screen and working back you will see the order from last station to irrigate to the first station to
irrigate. In the example above the last station to irrigate was station 8 (lower right), the next to last station to irrigate was station 12
then 9, 10, 11, 7 etc. The first station to irrigate was station 2.
Diagnostics