17
MANUAL SPECIAL SEQUENCE
Start Times :
OFF
Number of Cycles :
2
Between Cycle Starts:
120
Schedule :
---
Mon ---
Wed ---
Fri
---
Run Until :
Aug 15 2003, Thu
2:00AM
Set the STATIONS & TIMES
Scheduled Manual Special Sequence
To set a scheduled manual special sequence, Press an
ARROW
Key to move the cursor to the first Start Times setting, Press
the
PLUS
or
MINUS
Key to set a start time (2:00AM has been set in the example below), a second start time can be set if
desired. Press an
ARROW
Key to move the cursor to the Number of Cycles setting, this setting determines how many times to
run the sequence each day, use the
PLUS
or
MINUS
Key to change the setting. Press an
ARROW
Key to move the cursor to
the Between Cycle Starts setting, this determines the amount of time (in minutes) between each cycle start, use the
PLUS
or
MINUS
Key to change the setting. Press an
ARROW
Key to move the cursor to the Schedule setting, use the
PLUS
Key to turn
a water day on (Mon, Wed and Fri are scheduled water days in the example below) and the
MINUS
Key to turn a day off. Press
an
ARROW
Key to move the cursor to the Run Until setting, this setting determines when the manual special sequence will end
(Aug 15, 2003 in the example below), Press the
PLUS
Key to set the date. Press the SET STATIONS & TIMES Menu Key to set
which stations to manually irrigate and set the run times of each of those stations (described on the previous page).
If scheduled irrigation is running when the manual special sequence is set to start, it will be temporarily halted until the manual
special sequence is finished, then resume where it left off.
TURN CONTROLLER OFF & NO WATER
Turn Controller OFF
Apply No Water Day(s) to : PROG A
3
No Water Days Summary
( no water by station )
Turn a Controller Off
Press the
TURN CONTROLLER OFF
Menu Key. The controller will be turned off and will immediately return to the STATUS
screen. To turn the controller back on, Press the
PUSH TO TURN ON
Menu Key located at the STATUS screen.
Set No Water Days for a Program or All Stations
Press the
ARROW
Key to move the highlight to the number of No Water Days setting. Press the
PLUS
or
MINUS
Key to set the
desired number of No Water Days. Press the
ARROW
Key to highlight which program to set the No Water Days for. Press the
PLUS
or
MINUS
Key to select the desired program (or all stations). Press the
APPLY NO WATER DAYS
Menu Key. In the
example above, all stations on Program B will be turned off for 3 days. To turn Program B back on at anytime, return to the
TURN CONTROLLER OFF & NO WATER screen and set the No Water Days to 0, and Press the
APPLY NO WATER DAYS
Menu Key.
10. No Water Key
Press the
NO WATER
Key to access the Turn Controller Off & No Water screen (shown below), from this screen you can turn
the controller Off, set No Water Days for indivdual stations, set No Water Days for all stations on the controller, or set No Water
Days for all stations on any of the controller’s seven programs. At the end of the No Water Days setting, the station(s) will start to
irrigate according to their irrigation schedule. The No Water setting can be set from 1 to 31 days.
