CALOR 6341, Инструкция пользователя

Страница: 18 / 24

ENG
I m p o rtant : never use abrasive products, which may damage the coating.
The appliance does not re q u i re any particular maintenance.
■
Use a soft cloth to remove dust.
■
Moisten the cloth to remove stains.
■
Clean the grills with a vacuum cleaner at least once per year.
For these operations, you appliance must be turned off .
■
M o re thorough cleaning can only be carried out by an approved service agent
■
This operation is not covered by the guarantee.
Changing the power lead.
If the power lead is damaged, it must be replaced by an approved service centre, as special tools
a re needed to disassemble this appliance.
10. MAINTENANCE
11. IN THE EVENT OF A PROBLEM
P ro b l e m
Your appliance does not
h e a t .
C a u s e s
It is not plugged in.
The On/Off dial is on 0.
The thermostat position is
set too low compared with
the temperature in the
ro o m .
In the event of abnorm a l
heating, a safety limiter
automatically cuts out the
a p p l i a n c e .
E.g.: Excessive dust on air
vent (E).
S o l u t i o n s
Plug it in.
Tu rn it to position
●
.
Set the thermostat to a higher
s e t t i n g .
Tu rn the dial to position 0 and
eliminate the cause of overh e a t i n g .
When the temperature of the
appliance re t u rns to normal, turn
the appliance back on, by turn i n g
the dial to position
●
.
For any other problems, please contact an approved service centre (see enclosed list).
I m p o rtant : special tools are needed to repair this appliance.