Calira MES Module B, Руководство по эксплуатации

Страница: 25 / 68

Lerchenfeldstr. 9 87600 Kaufbeuren Tel.: 049 (0)8341 9764-0 Fax: 049 (0)8341 67806
25
MES Module B
The Module B is a product of the most up-to-date, microprocessor-controlled
charging technology. This technology permits high output together with low
weight and small dimensions. By using high-quality electronics, it operates with
high efficiency. Automatic charging affords protection and prevents harmful
battery overload. This considerably extends the life of the battery. Once
connected to the battery connections on Module B and the mains connection on
Module A, the Module B is operative.
By operating the main switch (illuminated button) the main switch relay
switches within Module B. The button illuminates. 12 volts consumers that are
connected to the Module A can be switched with the main switch ON and OFF.
The Module B is designed for parallel operation and buffer operation. At all
times, 12 volts consumers connected to the Module A can remain connected, be
added or switched off. 12 volts consumers are supplied with the power and the
supply battery is charged at the same time. Consumer current should be lower
than the maximum charging current, otherwise the battery will not be charged.
If the Module B is operated together with a temperature sensor for the supply
battery, the Module B controls the charging voltage automatically depending on
the battery temperature. This ensures a particularly effective and gentle
charging process for the battery. When not using a temperature sensor, the
Module B controls the charging process as if the battery temperature was 20 °C.
The device is designed for operation in ambient temperatures of up to 35 °C. If
the temperature inside the device rises due to a lack of air circulation or due to
high ambient temperature, the charging current is automatically reduced in
steps.