manualshive.com logo in svg

CALEFFI 257260A, Руководство пользователя

"CALEFFI 257260A" - продукт высокого качества с важной функцией в вашей системе. Для получения подробной информации об использовании устройства обязательно скачайте бесплатный руководство по эксплуатации с manualshive.com. Здесь вы найдете всю необходимую информацию для работы с вашим устройством.

Поделиться
Скачать
background image

© Caleffi 11236_iSolar_Plus.mon

us.ind

d

| 

2

Safety advice:
Please read the following information carefully before 
installing and operating the controller. In this way damage 
to the solar system caused by wrong installation will be 
avoided. Please make sure that the mounting is adapted to 
the characteristics of the building, that the local regulations 
are respected and is conform with the technical rules.

Description of symbols

Signal words describe the danger that may occur, when it 
is not avoided.
Warning means that injury, possibly life-threatening injury, 
can occur.
Attention means that damage to the appliance can occur.

Information about the product

Proper usage
The solar controller is designed for use in solar thermal 
and heating systems in compliance with the technical data 
specified in these instructions. 
Improper use excludes all liability claims. 

Note
Strong electromagnetic fields can impair the 
function of the controller.

 

Î

Make sure the controller as well as the 
system are not exposed to strong electro-
magnetic fields.

WARNING!

Warnings are indicated with a 
warning triangle! 
They contain information on how 
to avoid the danger described.

Note
Notes are indicated with an information 
symbol.

Subject to technical change. Errors excepted.

Please pay attention to the following safety advice in order 
to avoid danger and damage to people and property.

Instructions:
Attention should be paid to

 

• Valid national and local standards and regulations

 

• Respective valid standards and directives
Equipment to be installed and used in accordance with 
the rules of the National Electrical Code (NEC) or with 
Canadian Electrical Code (CEC), Part I.
These instructions are exclusively addressed to authorized 
skilled personnel. 

 

• Only qualified electricians should carry out installation 

and maintenance work.

 

• Initial installation should be carried out by qualified per-

sonnel

 

Î

Arrows indicate instruction steps that should be 
carried out.

General

Contents

General ..................................................................... 2
Overview ................................................................... 3
1.  Installation ........................................................... 4
1.1 Mounting ................................................................................4
1.2 Electrical connection ...........................................................4
1.3 Data communication/ Bus .................................................5
1.4 Terminal allocation in the different system layouts ....6

System layout 1 .....................................................................6
System layout 2 .....................................................................8
System-specific functions ................................................ 10
System layout 3 ...................................................................12
System-specific functions .................................................14
System layout 4 ...................................................................16
System layout 5 ...................................................................18
System layout 6 .................................................................. 20
System layout 7 .................................................................. 22

System layout 8 ...................................................................24
System-specific functions ................................................ 26
System layout 9 .................................................................. 28
System layout 10 ............................................................... 30

2.  Operation and function ................................... 32
2.1 Push buttons....................................................................... 32
2.2 System monitoring display .............................................. 32
2.3 Flashing codes .....................................................................33
3.  Commissioning ................................................. 34
4.  Channel overview ............................................. 37
4.1 Display channels .................................................................37
4.2 Adjustment channels ........................................................ 39
5.  Troubleshooting................................................ 47
5.1 Various ................................................................................. 48
6.  Accessories ........................................................ 50
Impressum .............................................................. 52

Содержание 257260A





















































Отзывы:

Нет отзывов

Похожие инструкции для 257260A

CAME Z Series Technical Documentation Manual preview
Z Series
Бренд: CAME Страницы: 16
Ultrak KEGS5000 User Manual preview
KEGS5000
Бренд: Ultrak Страницы: 41
Zander Aachen ZX Series Quick Start Manual preview
ZX Series
Бренд: Zander Aachen Страницы: 10
Paratec TE Series User Manual preview
TE Series
Бренд: Paratec Страницы: 8
J+J S2 Handbook preview
S2
Бренд: J+J Страницы: 33
YOKOGAWA TC 10-L Engineering Manual preview
TC 10-L
Бренд: YOKOGAWA Страницы: 20
YOKOGAWA UTAdvanced UT32A Technical Information preview
UTAdvanced UT32A
Бренд: YOKOGAWA Страницы: 3
HQ Power VDPLC010 User Manual preview
VDPLC010
Бренд: HQ Power Страницы: 23
Trane Technologies BAYSTAT033AC Installation Manual preview
BAYSTAT033AC
Бренд: Trane Technologies Страницы: 8
Brooks GF100 Series Installation And Operation Manual preview
GF100 Series
Бренд: Brooks Страницы: 68
NI cRIO-9065 Features preview
cRIO-9065
Бренд: NI Страницы: 28
W.E.ST. PQ-132-U Technical Documentation Manual preview
PQ-132-U
Бренд: W.E.ST. Страницы: 34
Edge Electrons EDGEIQ EE-202-0050 Installation, Commissioning And Operation Manual preview
EDGEIQ EE-202-0050
Бренд: Edge Electrons Страницы: 32
UCS NANO DC Manual preview
NANO DC
Бренд: UCS Страницы: 44
EtherCAT TMCL Firmware Manual preview
TMCL
Бренд: EtherCAT Страницы: 107
PR Lighting NOVA PR-2013D Manual preview
NOVA PR-2013D
Бренд: PR Lighting Страницы: 12
Datapath iolite 600 Quick Start Manual preview
iolite 600
Бренд: Datapath Страницы: 16
HUAYUAN MAM860 Operation Manual preview
MAM860
Бренд: HUAYUAN Страницы: 17

Бренды по названию

Популярные бренды

Загрузить еще бренды