White
Side Spring
4-40 x ½”
Red Standoff
Assemble the Tweak Plates
1 - Use the red button head screws [22] to fasten the red
standoffs [28] to the graphite tweak plate [24].
2 - Put the red ball stud [29] through the tweak plate and
secure with a red locknut [9] as shown in the illustration.
A
TTACH
S
PRING TO
M
ETAL
R
ETAINER
Use a small screwdriver or your fingernail to start the
spring [27] into the groove on the metal retainer [26].
Pull the leading coil over the retainer and place the top
coil into the groove. Then, holding the retainer
securely, turn the spring clockwise to “open” the coil
and snap the remaining portion over the groove.
1 - Mount the completed tweak brace assembly to the chassis
as shown using the 4-40 x 1/4” red flat head screws [23]. Do
this for both left and right side tweak plates.
Bag 4
5
27
27
28
26
28
22
29
24
9
Red Alum
4-40 Ballstud
29
Red Locknut
9
4-40 x 1/4”
Red Button Head
22
4-40 x 1/4”
Red Alum FH
23
23
Tweak Plates
