12
55
72
74
73
Installing the Lower arm to the
Chassis
1 - Insert three 4-40 x 7/16” red FH screws [55] through the
chassis, then through the Front End Riser Plate [72], and top
with the Front End Mounting Plate [73]. Secure these parts with
three red locknuts [9]. We recommend starting in the middle
hole of the plates as shown in the pic. This will give you the
option to go either wider or narrower if need be.
2 - Now, secure the front end assembly to the plate using the 8-
32 x ½” low head front end screws [74]. Again, we recommend
starting in the middle hole, giving you the option to go longer or
shorter.
3 - Repeat these steps for the other side.
4 - For fine ride height adjustments, you can use CRC’s 4262
plastic shim kit (optional)
CRC Pro-Strut
Front End - cont.
4-40 x 7/16”
Red FH
55
Red Locknut
9
8-32 x ½”
Low Head
F.E. Screw
74
9
Installing the Bumper to the Chassis
1 - Insert three 4-40 x 5/16” red FH screws [38] through the
chassis, then through the Bumper [75] Secure these parts with
three red locknuts [9].
4-40 x 5/16”
Red FH
38
38
9
75
