#9 Viper_SC_Manual_
001-5008-000_Rev12e.docx |
Page 63
Viper uses
RADIUS
(Remote Authentication Dial in User Service) for authentication and authorization. RADIUS is a
networking protocol that provides centralized authentication, authorization and accounting management for computers
and devices to connect and use a network service.
RADIUS in the Viper is used for two authentication scenarios:
User Authentication
(see
Section 4.5.2.1.1
) and
Device
Authentication
(see
Section 4.5.2.1.2
).
RADIUS is used to authenticate users who wish to connect to a unit through the Viper SC Web Interface, the FTP
server, or the command shell.
RADIUS can also be used to authenticate devices based on their MAC addresses. Unauthorized devices will not be
able to establish a VPN secure tunnel with an access point.
To use RADIUS within a Viper network, an external RADIUS server must be set up with a proper device database (identified
by MAC addresses) and a user database. RADIUS transactions are encoded with an encryption key that is only known to the
RADIUS server and each Viper device.
Figure 51 – Security
Radius (Configuration)
4.5.2.1
GENERAL
RADIUS authentication can only be configured if your Viper is operating in router mode.
4.5.2.1.1
USER AUTHENTICATION
Содержание Viper 100
Страница 42: ...9 Viper_SC_Manual_001 5008 000_Rev12e docx Page 35 Figure 23 Setup Basic Channel Table...
Страница 44: ...9 Viper_SC_Manual_001 5008 000_Rev12e docx Page 37...
Страница 103: ......
