CalAmp Viper 100 Скачать руководство пользователя страница 64 | Manualshive

Страница: 64 / 115

background image

#9 Viper_SC_Manual_

001-5008-000_Rev12e.docx |

Page 57

Multicast Forwarding

This parameter controls the forwarding of multicast packets between the LAN interface and the RF interface. The packets
forwarded from the LAN to the RF interface are identified by the "Multicast Address List" (all other multicast packets are
dropped). The "Multicast White List" controls which multicast packets are forwarded from the RF interface to the LAN
interface. When the "Multicast White List" is empty, all multicast packets received from the RF interface are forwarded to
the LAN interface; otherwise, only the multicast packets identified in the white list are forwarded to the LAN.

Enabled

- Forwarding of multicast packets is enabled (default).

Disabled

- Forwarding of multicast packets is disabled.

Multicast to Broadcast (LAN to RF)

When a multicast packet is forwarded from the LAN interface to the RF interface, the destination IP address can be changed
to the broadcast IP address (255.255.255.255)

Enabled

- Conversion of the destination IP address from multicast to broadcast is enabled.

Disabled

- Conversion of the destination IP address from multicast to broadcast is disabled (default).

Multicast to Broadcast (RF to LAN)

When a multicast packet is forwarded from the RF interface to the LAN interface, the destination IP address can be changed
to the broadcast IP address (255.255.255.255)

Enabled

- Conversion of the destination IP address from multicast to broadcast is enabled.

Disabled

- Conversion of the destination IP address from multicast to broadcast is disabled (default).

4.4.3.2.1

MULTICAST ADDRESS LIST

All packets received from the LAN interface with a multicast destination IP address matching one of the multicast address
identified in this list will be forwarded from the LAN interface to the RF interface.

4.4.3.2.2

MULTICAST WHITE LIST

All packets received from the RF interface with a multicast destination IP address matching one of the multicast address
identified in this list will be forwarded from the RF interface to the LAN interface. If this list is empty, any packet received
from the RF interface with a multicast destination IP address will be passed over the LAN. If this list is non-empty, any
packet received from the RF interface with a multicast destination IP address that does not match an entry in this list will be
dropped.

4.4.4

IP OPTIMIZATION

«
...
62
63
64
65
66
...
»

Содержание Viper 100




















































































































Отзывы:

Нет отзывов

Похожие инструкции для Viper 100

Бренд: Paradyne Страницы: 86

Express Ethernetwork DI-704P

Бренд: D-Link Страницы: 2

Бренд: ZETR Страницы: 2

Бренд: CallDirect Страницы: 33

Бренд: IBM Страницы: 248

Device Server UDS 10

Бренд: Lantronix Страницы: 8

OCTOPUS 5TX-EEC

Бренд: Hirschmann Страницы: 6

NJ220 - IntelliJack Switch

Бренд: 3Com Страницы: 82

Conel UR5i v2 Libratum

Бренд: B&B Electronics Страницы: 32

Бренд: APARIAN Страницы: 2

Бренд: Idis Страницы: 85

Бренд: Linksys Страницы: 80

Service Aggregation Router 7705

Бренд: Alcatel-Lucent Страницы: 20

Бренд: Garderos Страницы: 21

TEG-S16R - DATA SHEETS

Бренд: TRENDnet Страницы: 12

Бренд: Avaya Страницы: 16

NetVanta 300 Series

Бренд: ADTRAN Страницы: 2

Бренд: XtendLan Страницы: 54

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды