CAKEWALK UM-3G, Руководство пользователя, Страница: 17 / 52

17
Getting Connected and Installing Drivers
1. The message “Found New Hardware” will appear in the lower right corner of the screen,
and the Found New Hardware wizard will appear.
* It may take between ten seconds to several minutes until the Found New Hardware
wizard appears.
If you are asked whether you want to connect to Windows Update, choose No and click
[Next] .
2. Choose Install the software automatically (Recommended) , and click [Next] .
3. If the Hardware Installation dialog box appears, click [Continue Anyway] to proceed
with the installation.
* If you are unable to proceed, click [OK] to halt the installation, and then change the settings as
described in “Driver Signing Options Settings (Windows XP)” (p. 29).
4. The screen will indicate “Completing the Found New Hardware Wizard.”
Click [Finish] .
10.
When installation is complete, the Driver Setup dialog box will indicate
“Installation has been completed.”
Click [Close] to close the Driver Setup dialog box.
If the System Settings Change dialog box appears, click [Yes] to restart Windows.
This completes the driver installation.
Now proceed to make the following settings.
* You won’t be able to use the UM-3G unless you’ve made these settings.
UM-3G_e.book 17 ページ ２００８年１１月２０日 木曜日 午後４時１０分