CAKEWALK UM-3G, Руководство пользователя, Страница: 10 / 52

10
Names of Things and What They Do
USB Cable
Use this when connecting the UM-3G to your computer.
[MODE] Switch
The UM-3G can be set to function as either the master or a slave device by means of this switch.
* Do not change the setting of the [MODE] switch while the UM-3G is connected to your computer.
Before changing the setting of the [MODE] switch, you must first disconnect the UM-3G from the
computer, change the setting of the switch, and then reconnect the UM-3G to your computer.
* For details on connecting multiple UM-3G (or UM-3EX) units, refer to “Connecting Multiple
UM-3G (or UM-3EX) Units” (p. 38).
[UNIT] Switch
Specifies the UM-3G’s UNIT number (p. 38).
To connect and use a multiple number of UM-3G units, you’ll need to set a different UNIT
number for each UM-3G.
* Do not change the setting of the [UNIT] switch while the UM-3G is connected. Before changing
the setting of the [UNIT] switch, you must first disconnect the UM-3G from the computer,
change the setting of the switch, and then reconnect the UM-3G to your computer.
UM-3G/UM-3EX Connectors
If you’re using additional UM-3G (or UM-3EX) units, connect them to these connectors.
* Do not connect any device other than a UM-3G or UM-3EX to the UM-3G/UM-3EX connectors;
doing so may cause malfunctions.
Rear Panel
Using a single UM-3G unit MASTER
Using multiple UM-3G (or UM-
3EX) units connected together
UM-3G connected to your computer MASTER
UM-3G (or UM-3EX) connected to the UM-3G/
UM-3EX connector of the master UM-3G
SLAVE
8
10
7 9 2
1
7
8
9
10
UM-3G_e.book 10 ページ ２００８年１１月２０日 木曜日 午後４時１０分